Icom IC-746PRO Instruction Manual page 59
Hf/vhf all mode transceiver
Hide thumbs
Also See for IC-746PRO:
- Manual (164 pages) ,
- Instruction manual (59 pages) ,
- Service manual (7 pages)
Table of Contents
Advertisement
D D Auto repeater function
This function automatically activates the repeater set-
tings (DUP– or DUP+ and/or tone encoder ON/OFF)
when the operating frequency falls within the general
repeater output frequency range and deactivates them
when outside of the range.
Set the auto repeater function ON-1 or ON-2 in set
mode in advance (p. 84). When set ON-1 or ON-2, re-
peater settings are automatically activated according
to the table below.
ON-1 automatically sets the duplex setting and ON-2
automatically sets the duplex setting and tone encoder
automatically.
• Frequency range and offset direction
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
DUPLEX DIRECTION
minus duplex
minus duplex
plus duplex
RECEIVE AND TRANSMIT
4
46
- Quick Links:
- I Rear Panel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-746PRO and is the answer not in the manual?
Questions and answers
Make icom IC 746 pro general coverage all band
The Icom IC-746PRO provides general coverage reception from 0.03–60MHz and 108–174MHz. However, specifications are only guaranteed for 0.5–29.99MHz, 50–54MHz, and 144–148MHz. To enable general coverage, select the desired band using the keypad above the tuning knob and then use the tuning knob to adjust the frequency as needed.
This answer is automatically generated