Icom IC-746PRO Instruction Manual page 98

11
SET MODE
I General set mode (continued)
22.
You can set the antenna connector selection to auto-
matic, manual or non-selection (when using 1 an-
tenna only for the HF/50 MHz bands).
: The antenna switch is activated and
the band memory memorizes the se-
lected antenna. (default)
: The antenna switch is activated and
selects an antenna manually.
: The antenna switch is not activated
and does not function. The [ANT1] con-
nector is always selected in this case.
23.
When the optional UT-102
installed, you can select between English and Japan-
ese as the language.
See p. 90 for unit installation.
24.
When the optional UT-102
installed, you can select between faster or slower
synthesizer output.
: Announces faster (default)
: Announces slower
See p. 90 for unit installation.
25.
When the optional UT-102
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated if desired.
: Announces operating frequency, mode
and receiving signal level. (default)
: Announces operating frequency and
mode only.
See p. 90 for unit installation.
26.
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
: 5 memo pads (default)
: 10 memo pads
85
VOICE SYNTHESIZER UNIT
: Announces in English (default)
: Announces in Japanese
VOICE SYNTHESIZER UNIT
VOICE SYNTHESIZER UNIT
is
is
is