Icom IC-746PRO Instruction Manual page 95

I General set mode (continued)
6.
A beep sounds each time a switch is pushed to con-
firm it. This function can be turned OFF for silent op-
eration.
Confirmation beep ON (default)
Confirmation beep OFF
The volume level can be set in 3.
(p. 81)
7.
A beep sounds when an operating frequency enters
or exits an amateur band. This functions independent
of the confirmation beep setting (above).
Band edge beep ON (default)
Band edge beep OFF
The volume level can be set in 3.
(p. 81)
8.
The [RF/SQL] control can be set as the RF/squelch
control (default), the squelch control only (RF gain is
fixed at maximum) or 'Auto' (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).
[RF/SQL] control as RF/squelch con-
trol (default)
[RF/SQL] control as squelch control
[RF/SQL] control as RF gain control
in SSB, CW and RTTY; squelch con-
trol in AM and FM
9.
This item turns the meter peak hold function ON and
OFF. When set to ON (default), peak meter readings
are displayed for about 0.5 sec.
10.
This item turns the COMP meter indication ON and
OFF during transmit. When set to ON, the COMP
meter is displayed instead of the SWR meter.
(default: OFF)
.
.
11
SET MODE
82