Set Mode; Set Mode Description - Icom IC-756PRO Instruction Manual

9

SET MODE

Set mode description

Set mode is used for programming infrequently
changed values or conditions of functions. This trans-
ceiver has a level set mode, display set mode, timer
set mode and miscellaneous (others) set mode.
• Set mode operation
q Push [EXIT] one or more times to close a multi-
function screen, if necessary.
w Push [(F-5)SET] to select the set mode screen.
e Push [(F-1)LEVEL], [(F-2)DISP], [(F-3)TIME] or
[(F-4)OTHERS] to enter the desired set mode.
r For display or miscellaneous (others) set mode,
push [(F-5)WIDE] to toggle wide and normal
screen.
t Push [(F-1)Y] or [(F-2)Z] to select the desired item.
•Start up screen
qr≥qot≥pp
qr≥wpt≥pp
•Set mode screen
qr≥qot≥pp
qr≥wpt≥pp
64
qw pp
F-5
qw pp
y Set the desired condition using the tuning dial.
• Push [(F-3)DEF] to select a default condition or value.
u For timer set mode, push [(F-4)SET] to enter the set
time.
i Push [EXIT] twice to exit the set mode.
•Level set mode (p. 65)
F-1
•Display set mode (p. 66)
F-2
•Timer set mode (pgs. 62, 67)
F-3
•Miscellaneous (others) set mode (p. 68)
F-4