Memory Channel Screen - Icom IC-756PRO Instruction Manual

Memory channel screen

The memory channel screen simultaneously shows 7
memory channels and their programmed contents. 13
memory channels can be displayed in the wide mem-
ory channel screen.
You can select a desired memory channel from the
memory channel screen.
• Selecting a memory channel using the
memory channel screen
q Push [EXIT] one or more times to close a multi-
function screen, if necessary.
w Push [(F-3)MEMORY] to select the memory chan-
nel screen.
• [(F-5)WIDE] toggles the standard and wide screens.
qr≥qot≥pp
qr≥wpt≥pp
e Rotate the tuning dial while pushing [(F-2)SET] to
select the desired memory channel.
• [Y] and [Z] can also be used.
r Push [EXIT] to exit the memory channel screen.
• Confirming programmed memory
channels
q Select the memory channel screen as described
above.
w Rotate the tuning dial while pushing [(F-1)ROLL]
to scroll the screen.
e Push [(F-2)SET] to select the highlighted memory
channel, if desired.
" " appears when the memory
channel is selected.
r Push [EXIT] to exit the memory channel screen.
• Setting a memory channel as a select
memory
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speedup
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q Select the memory channel screen as described
at left.
w Rotate the tuning dial while pushing [(F-2)SET] to
select the desired memory channel.
• [Y] and [Z] can also be used.
e Push [(F-3)SELECT] to set the memory channel
as a select memory or not.
qw pp
r Repeat steps w to e to program another memory
channel as a select memory channel, if desired.
t Push [EXIT] to exit the memory channel screen.
Setting select memory channels is also possible in
the scan screen.
MEMORY OPERATION
qr≥qot≥pp
qr≥wpt≥pp
" " appears for select memory channel.
6
qw pp
51