Icom IC-756PRO Instruction Manual page 71

Miscellaneous (others) set mode
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for HF bands in FM
mode only and is used to input the repeater offset for
an HF band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for 50 MHz band FM
mode only, and is used to input the repeater offset for
the 50 MHz band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
When this item is ON, the tuning dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated.
See p. 32 for split frequency operation details.
The internal antenna tuner has an automatic start ca-
pability which starts tuning if the SWR is higher than
1.5–3.
When "OFF" is selected, the tuner remains OFF even
when the SWR is poor (1.5–3). When "ON" is se-
lected, automatic tune starts even when the tuner is
turned OFF.
Tuning of the internal antenna tuner can be started
automatically at the moment the PTT is pushed after
the operating frequency is changed (more than 1%
from last-tuned frequency).
(continued)
Minus 0.1 MHz offset
(default)
Minus 1.0 MHz offset
(default)
Split lock function ON
Automatic tuner start
ON
Automatic PTT start
ON
9
SET MODE
Minus 4.0 MHz offset
Plus 4.0 MHz offset
Split lock function OFF
(default)
Automatic tuner start
OFF (default)
Automatic PTT start
OFF (default)
69