Icom IC-756PRO Instruction Manual page 73

Miscellaneous (others) set mode
This item selects the new line code of the internal
RTTY decoder. See p. 41 for details.
CR : Carriage Return
LF : Line Feed
When the optional UT-102
installed, you can select between English and Japan-
ese as the language.
See p. 73 for unit installation.
When the optional UT-102
installed, you can select between faster or slower syn-
thesizer output.
See p. 73 for unit installation.
When the optional UT-102
installed, you can have frequency, mode and signal
level announcement. Signal level announcement can
be deactivated if desired.
When "OFF" is selected, the signal level is not an-
nounced.
See p. 73 for unit installation.
This item sets the number of memo pad channels
available. 5 or 10 memo pads can be set.
This item sets the auto tuning step function. When ro-
tating the tuning dial rapidly, the tuning step automat-
ically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster).
is
VOICE SYNTHESIZER UNIT
is
VOICE SYNTHESIZER UNIT
is
VOICE SYNTHESIZER UNIT
(continued)
CR, LF and CR+LF
(default)
English announcement
(default)
Faster announcement
(default)
Signal level announcement
(default)
5 memo pads
(default)
Auto tuning step is turned ON.
Fastest tuning step during rapid rotation
(default)
Auto tuning step is turned ON.
Faster tuning step during rapid rotation
Auto tuning step is turned OFF
9
SET MODE
CR+LF only
Japanese announcement
Slower announcement
No signal level
announcement
10 memo pads
.
71