IBM 1U Installation And Maintenance Manual page 18

8
1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide
9. Route the keyboard-and-mouse cable:
a. Route the cable through the slot on the left side of the cable-routing area
on the underside of the keyboard. Do not route the cable through any of
the other three slots. (See the following illustration.)
Note: In the following illustration, the console unit is turned over and is
placed on a table or other flat surface.
b. Gently squeeze the bushing and push it toward the rear of the console unit
to remove it.
c. Push the keyboard-and-mouse cable through the slit in the plastic bushing
and push the bushing into the cable-routing cutout in the console unit
frame.