IBM 1U Installation And Maintenance Manual page 12

v One rail-alignment spacer
v One console-switch mounting bracket with channel (for routing the power, video,
v One console-switch mounting bracket
v One 2.4 m (8 ft) IEC connector power cable
v Miscellaneous hardware kit (cage nuts, clip nuts, screws, cable straps)
v Hook-and-loop fastener strips to attach a keyboard and keyboard-and-mouse
v IBM Documentation CD
You might need the following tools to install the console unit:
v One number 1 Phillips screwdriver
v One number 2 Phillips screwdriver
v One cage-nut-insertion tool or flat-blade screwdriver (for installing cage nuts in
You need the following tools to replace customer replaceable units:
v One 7/16-inch wrench (for removing the cable-management-arm retaining nut)
v One 1/4-inch wrench (for removing the inner slide rails from the console unit)
See the documentation that comes with your rack cabinet or console switch for
further information about those products.
2
1U 17-inch Flat Panel Console Kit: Installation and Maintenance Guide
and keyboard-and-mouse cables)
cables to the console unit
some rack cabinets)