Table of Contents
Advertisement
5. Carefully route the keyboard-and-mouse cable down through the keyboard tray
opening, up through the opening on the right side of the tray, and toward the
cable-management arm. Pull the full length of the cable through the opening.
6. Place the keyboard in the tray and press the hook-and-loop fasteners together.
Hook-and-loop fastener
7. Close the flat-panel display.
8. Turn over the console unit:
a. Grasp the cable-management arm and the loose cables in one hand.
b. On the opposite end of the console unit, grasp the flat-panel display and
the console unit frame together with the other hand.
c. Carefully turn over the console unit.
Attention:
When you route the keyboard-and-mouse cable, make sure that
the cable does not hang below the underside of the keyboard where it might
be damaged if it interferes with the devices in the rack space below the
console unit.
Chapter 2. Installing the console unit in the rack cabinet
7
Hide quick links:
Advertisement
Table of Contents
