Receiving Instructions; Package Inspection; Equipment Inspection; Identification Labels - NewMar Commander II Series Manual

3 R I
ECEIVING
NewMar provides all equipment to the delivering carrier securely packed and in perfect condition. Upon
acceptance of the package from NewMar, the delivering carrier assumes responsibility for its safe arrival.
Once the equipment is received, it is the recipient's responsibility to document any damage the carrier may
have inflicted, and to file the claim promptly and accurately.
N : the period to make a claim against damage by a transport carrier can be short, a matter of days, and
OTE
varies by transport method, the transport contract, and local laws.
3.1

Package Inspection

Examine the shipping crate or carton for any visible damage: punctures, dents and any other signs of possible
internal damage.
Describe any damage or shortage on the receiving documents and have the carrier sign their full name.
3.2

Equipment Inspection

Open the crate or carton and inspect the contents for damages. While unpacking, be careful not to discard
any equipment, parts or manuals. If any damage is detected, call the delivering carrier to determine the
appropriate action. They may require an inspection.
N : Save all the shipping materials for the inspector to see.
OTE
After the inspection has been made, if damage has been found, contact NewMar. We will determine if the
equipment should be returned to our plant for repair or if some other method would be more expeditious. If
it is determined that the equipment should be returned to us, ask the delivering carrier to send the packages
back at the delivering carrier's expense.
If repair is necessary, we will invoice you for the repair so that you may submit the bill to the delivering
carrier with your claim forms.
It is your responsibility to file a claim with the delivering carrier. Failure to properly file a claim for shipping
damages may void warranty service for any physical damages later reported for repair.
3.3 Handling
Handle the equipment with care. Do not drop or lean on front panel or connector. Keep away from moisture.
3.4

Identification Labels

Model number and serial number are clearly marked on all equipment. Please refer to these numbers in all
correspondence with NewMar. Ideally provide a photograph of the product label for reference.
4 S
COPE
This manual covers essential information for the installing and commissioning of the NewMar Power System
Commander II (CMDRII) and Commander II+ (CMDRII+) where the significant difference between the systems
is the number of rectifier shelves and the presence of a DC-DC converter shelf, respectively.
N : System set-up for the controller, power modules and other ancillary devices are provided in separate
OTE
manuals. Where appropriate these are supplied with the system.
IMPORTANT: this is a generic manual. The Commander II & II+ systems can be configured with a wide range
of options. Should this manual not cover any part of the functionality of your system please contact your
NewMar representative or sales@poweringthenetwork for further information as required.
5 S O
YSTEM VERVIEW
The Commander II range is designed to allow a customized DC power solution with all the benefits of a
standard "off the shelf" system.
The system is intended to be a complete power system in a box with no connections needed to be made
internally. The system is designed to be extremely simple to install and set up.
NewMar Power System Manual
Model: COMMANDER II AND COMMANDER II+
NSTRUCTIONS
M-CMDRII 063022 Page 6 of 43
Version 1.0