Table of Contents
Advertisement
In this scenario there is a set of alarms that display depending on the system configuration relating to the
nonoperation of the IO board.
For example:
For information on the use of the energy manager Web UI please refer to the Energy Manager Installation and
Operation Manual.
7.4 Energy manager & IO PCB Alarm Output Configuration
For full EM4x functionality and operation information, refer to the EM4x Installation and Operation Manual.
7.4.1 EM4x LED Alarm Mappings
Refer to the Alarm Configuration>Alarm Configuration page of the Web UI to see the priority setting of each
alarm.
Refer to the Relay/Output page Configure Relay section of the Web UI to understand the how the Alarm
Configuration is mapped to the EM4x LEDs.
7.4.1.1
EM4x Red LED Urgent Alarm Mapping
( For reference only. Actual system alarm mapping may vary)
7.4.1.2
EM4x Yellow LED non-Urgent Alarm Mapping
NewMar Power System Manual
Model: COMMANDER II AND COMMANDER II+
M-CMDRII 063022
Page 19 of 43
Version 1.0
Advertisement
Table of Contents
