Table of Contents
Advertisement
1 R
I
ECEIVING
NSTRUCTIONS
For your protection, the following information and the product manual should
CAUTION:
be read and thoroughly understood before unpacking, installing and using the
equipment.
We present all equipment to the delivering carrier securely packed and in perfect condition.
Upon acceptance of the package from us, the delivering carrier assumes responsibility for its
safe arrival to you. Once you receive the equipment, it is your responsibility to document any
damage the carrier may have inflicted, and to file your claim promptly and accurately.
Package Inspection
Examine the shipping crate or carton for any visible damage: punctures, dents and any
other signs of possible internal damage.
Describe any damage or shortage on the receiving documents and have the carrier sign
their full name.
Equipment Inspection
Within fifteen days, open crate or carton and inspect the contents for damages. While
unpacking, be careful not to discard any equipment, parts or manuals. If any damage is
detected, call the delivering carrier to determine the appropriate action. They may require
an inspection.
Save all the shipping materials for the inspector to see!
After the inspection has been made and you have found damage, call us. We will determine
if the equipment should be returned to our plant for repair or if some other method would be
more expeditious. If it is determined that the equipment should be returned to us, ask the
delivering carrier to send the packages back at the delivering carrier's expense.
If repair is necessary, we will invoice you for the repair so that you may submit the bill to the
delivering carrier with your claim forms.
It is your responsibility to file a claim with the delivering carrier. Failure to properly file a
claim for shipping damages may void warranty service for any physical damages later
reported for repair.
Handling
Handle the equipment with care. Do not drop or lean on front panel or connectors. Keep away
from moisture.
Identification Labels
Model numbers are clearly marked on all equipment. Please refer to these numbers in all
correspondence with Newmar.3
2 S
COPE
This manual covers essential information for the installation and commissioning of the
Centurion II DC Power System
System set-up for the rectifiers, alarms etc., are provided in separate manuals for the SM36 (C2C-
36) supervisory module and rectifiers.
All installation and maintenance must be carried out by suitably qualified personnel.
Note: The Centurion II System is available with Positive Earth (-48Vdc, -60Vdc) or Negative
Earth (+24Vdc). The installation manual covers both Positive and Negative Earth
systems. The standard system is assumed to be a Positive Earth system. Where
parameters and settings differ between systems, the Negative Earth system parameters
are specified within parenthesis i.e. ().
3 S
O
YSTEM
VERVIEW
Newmar • PO Box 1306, Newport Beach, CA 92663
• Phone: 714-751-0488 • E-mail: techservice@newmarpower.com
2
Advertisement
Table of Contents
