Table of Contents
Advertisement
If you pull a new device into a room via drag and drop, a pop-up window opens in which all
devices that are located in the system are listed and which have not been allocated to a room.
The devices are suitable respectively for the selected application.
Fig. 31:
Pop-up window with the suitable devices (example illustration)
Identification
The device can be identified via the serial number.
Identification via serial number
Fig. 32:
Identification via serial number (example illustration)
Compare the serial number and the short ID of the identification label, which is glued on the
■
device plan, with the numbers and IDs in the list. This is how the searched for device and
possibly the searched for channel are identified.
Specifying a name
1. Enter a name in text field [3] under which the application is to be displayed later, (e.g.
"Ceiling light" or "Living room blind").
2. Tap on the "Save" button to take over the adjustments.
–
This takes over the entry.
Product manual 2CKA00xx73xxxxx
Commissioning via ABB-free@home®
│92
Advertisement
Table of Contents
