ABB SmartTouch i-bus KNX Product Manual page 142

x of n (For 5 objects, object 1 to 5):
00000
10000
11000
11100
11110
11111
– Grey code: For 5 objects, object 1 to 5:
00000
10000
01000
11000
00100
10100
– 1-byte unsigned [0 - 255]: A value is sent as 1-byte value without a sign, e.g. actuating
value. The value can be sent for each level. The following supplementary parameters are
available:
Value Off:
Options:
The parameter is used to set which 1-byte value is to be sent.
Notice
The parameter is only available when parameter "Deactivation of switch-
off option" is set on "No".
Value level x (1 - 8):
Options:
The parameter is used to set for which level the value is to be sent.
Notice
How many "Value level x" parameters are available depends on the
setting of the "Number of levels" parameter.
Product manual 2CKA00xx73xxxxx
KNX control elements and application parameters
> send all objects "0"
> Object 1 sends "1" (also sends the 0 bit = Yes), objects 2 to 5 send "0"
> Objects 1 and 2 send "1", objects 3 to 5 send "0"
etc.
01100 00110
11100 etc.
00010
10010
01010
11010
Setting option from 0 - 255
Setting option from 0 - 255
Control element "Fan switch"
│142