ABB SmartTouch i-bus KNX Product Manual page 64

Commissioning of the KNX Function via DCA (from ETS5)
Temperature
Notice
The temperature parameters refer to the temperature display in the top bar of
the display.
Unit of temperature
■
Options:
The parameter is used to specify the temperature in the units of °C (Celsius) or °F (Fahrenheit).
Display room temperature
■
Options:
The room temperature is displayed when the checkbox is activated.
Display of outside temperature
■
Options:
The exterior and room temperature are displayed alternating when the checkbox is activated.
Room/outdoor temperature change interval [sec.]
■
Options:
The parameter is used to specify the room/outdoor temperature change interval [sec.]
Notice
The parameter is available only when the parameters "Display outdoor
temperature" and "Display room temperature" are activated.
Use for room temperature sensor
■
Options:
The parameter is used to specify whether the room temperature is measured via the indoor
sensor of the device or via an outdoor KNX temperature sensor.
The outdoor sensor must be allocated via a group address.
Compensating value for temperature measurement (x 0.1K) [K]
■
Options:
The parameter is used to specify the adjustment value for the temperature measurement.
Product manual 2CKA00xx73xxxxx
°C
°F
Activate
Deactivate
Activate
Deactivate
3 - 10
Indoor sensor
Outdoor sensor
Setting option from -128 - +127 K
│64