Commissioning of the KNX Function via DCA (from ETS5)
Primary function
The primary function is triggered by touching the display with 3 or more fingers.
Use primary function
■
Options:
The checkbox is used to specify whether the primary function is to be activated or deactivated.
Icon for primary function
■
Options:
The parameter is used to specify the icon for the primary function.
Object type
■
Options:
The parameter is used to specify the object type.
Reaction to pressing
■
Options:
The parameter is used to specify the reaction behaviour to pressing.
Reaction to release
■
Options:
The parameter is used to specify the reaction behaviour to release.
Product manual 2CKA00xx73xxxxx
Activated
Deactivated
<Icon>
1 bit
1-byte value [0-100%]
1-byte value [0-255%]
Number of scene [1-64]
RTC operating mode [1 byte]
Value 1
Value 2
Alternating value 1/value 2
Inactiv
Value 1
Value 2
Alternating value 1/value 2
Inactiv
│68