ABB SmartTouch i-bus KNX Product Manual page 67

Commissioning of the KNX Function via DCA (from ETS5)
Effect of picture transfer
■
Options:
The parameter is used to specify the slide transition effect.
Notice
The parameter is available only when parameter "Screen saver mode" is set on
"Display of slides".
Slide show interval
■
Options:
The parameter is used to specify the slide show interval.
Notice
The parameter is available only when parameter "Screen saver mode" is set on
"Display of slides".
Order of slides
■
Options:
The parameter is used to specify the order of slides.
Notice
The parameter is available only when parameter "Screen saver mode" is set on
"Display of slides".
Information start page
Use information start page
■
Options:
The use of the information start page is activated via the checkbox.
Use line x
■
Options:
The parameter is adjustable for a total of 4 lines. The parameter is used to specify the text type
that is to be used for the respective line.
Notice
The parameter is available only when parameter "Use Information start page"
has been activated.
Product manual 2CKA00xx73xxxxx
Shift from the right
Fade out
5 - 120
At random
Alphabetically
Activated
Deactivated
No
Static text
14-byte text
│67