ABB SmartTouch i-bus KNX Product Manual page 66

Commissioning of the KNX Function via DCA (from ETS5)
Screensaver
Display screen saver [min.]
■
Options:
The parameter is used to specify the duration after which the screen saver is to be displayed.
Screen saver mode
■
Options:
When the checkbox is activated an acoustic signal sounds during the press of a button.
Type of clock
■
Options:
The parameter is used to specify the type of clock.
Notice
The parameter is available only when parameter "Screen saver mode" has been
set on "Timer".
Display of seconds
■
Options:
This parameter is use to deactivate or activate the display of the seconds.
Notice
The parameter is available only when parameter "Screen saver mode" has been
set on "Timer".
Product manual 2CKA00xx73xxxxx
No screen saver
5
10
15
30
60
120
Timer
Picture display
Weather data
Internet weather
Analog
Digital
Activated
Deactivated
│66