Table of Contents
Advertisement
The following areas become available:
Pos.
Designation
[1]
Display screen
[2]
Sound
[3]
Network connections
[4]
Time and date
[5]
Access authorizations
[6]
User settings
[7]
Video surveillance
[8]
Intercom list
[9]
Programming button
[10]
Advanced settings
[11]
Software update
[12]
About
Product manual 2CKA00xx73xxxxx
Description
Setting the brightness of the display via the slider.
Specifying a screensaver.
Specifying the volume for the following sounds:
Click sound
■
Warning sound
■
Fault sound
■
Also a selection of sounds for different types of
messages can be made.
■ If a micro SD card (SDHC) with suitable sound
files is in the device, select a different sound
from the card via the drop-down menu. The
sound files should have format "mp3". Also
wave files can be used.
Notice
The card must remain inserted in the device for
this function!
Adjustment of the network settings. Setup of
access to the Welcome app and the MyBuildings
Portal.
Different time and date settings:
Time
■
Time zone
■
Date
■
Start of week
■
If it was specified in the commissioning software
that the end user can change the PIN code
directly on the device, this page then becomes
visible.
Here the PIN code levels can be specified and
■
adjusted.
Here the following settings can be made:
Language
■
Sensors
■
Door communication
■
Reset options
■
Management of the IP and Welcome cameras
(preview, positioning, etc.).
Here all input and output devices (microphone,
telephone) can be configured.
Here the programming button for the primary
function is added and set.
Here settings and data can be deleted.
Via this area the software is updated (see chapter
13 "Update" on page 324).
This page provides general system information.
Operation
│310
Advertisement
Table of Contents
