Version 2
1. Tap on the panel [1] (menu devices, scenes and groups) at the left edge of the screen.
–
The "Panel configuration" opens.
2. On the screen edge at the top select the panel whose information you want to edit.
Fig. 39:
Panel configuration
You can add devices or functions either via the room view or the type view.
In the room view select the devices/functions according to their positioning in the building
■
plan.
In the type view select the devices/functions according to their type. The devices/functions
■
are grouped here according to type (e.g. lights, scenes, actions, etc.).
Actuators/group selection
1. Select a room in the bar at the right edge of the screen.
–
The actuators and groups contained in the selected room are displayed in the list view.
The sequence is portrayed in the following by means of a room temperature controller.
Fig. 40:
Actuator/group selection
Product manual 2CKA00xx73xxxxx
Commissioning via ABB-free@home®
│102