ABB SmartTouch i-bus KNX Product Manual page 282

Blind (basic version can be further adjusted, e.g. with value display)
Blind control elements can be used to implement the activation of blinds, awnings, doors and
other motor-driven actuators.
Control element
Blind
Product manual 2CKA00xx73xxxxx
Status Function
Stopping/starting in the middle (depending on
the operating mode). The button in the middle
can display the status. A corresponding
animation is displayed during the movement.
Operating procedure:
– Icons for Up/Down
Brief press of the button
Moving by a step (the icon in the middle does
not change).
Long press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When the end stop has been reached or a
brief press on icon "Up / Down" (depending on
the direction of movement).
Change
Change in the direction of travel with a brief
press on icon "Up/Down". Followed by a long
press on icon "Up / Down" (depending on the
desired direction of movement).
– Icons in the middle (blind)
Brief press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When reaching the limit stop or a brief press of
the button on the icon it stops in intermediate
position.
Operation
│282