ABB SmartTouch i-bus KNX Product Manual page 100

Under "Other settings" you can configure the settings described in the following.
Pos.
[1]
[2]
[3]
[4]
Product manual 2CKA00xx73xxxxx
Description
Parameters
LED switch-on brightness night
[%]
LED switch-on brightness day [%]
Display of idle state
Hours count
User language
Acoustic feedback
Authorizations
Menu item "Authorizations" is used to specify whether a user with installer authorization
is required for the reconfiguration of the device.
In addition, you can nevertheless assign users with read rights the authorization to
switch this device.
Information about the device
Listing of device information (device number, software version, etc.)
Maintenance
You can start the device anew, read the device in again or reset it by tapping the
respective buttons.
Restart
■
Read device in again
■
Reset
■
Commissioning via ABB-free@home®
Setting the LED switch-on brightness for night
in % via the -/+ buttons.
Notice: The parameter only functions when a
time profile with the application "LED day/night
switchover" is available. The device (channel)
must be linked with this application!
Setting the LED switch-on brightness for day
in % via the -/+ buttons.
Notice: The parameter only functions when a
time profile with the application "LED day/night
switchover" is available. The device (channel)
must be linked with this application!
Specifying the time the device changes into
the idle state.
The format in which the count of hours is to
take place (12 or 24 hours).
User language in which the information is
displayed on the panel.
Activation or deactivation of acoustic feedback
when operating the panel.
│100