Live (Mcu); Getting Started 开始使用 - PRESONUS FaderPort Owner's Manual

6

Live (MCU)

6.1 Getting Started
6 Live (MCU)
6.1 Getting Started 开始使用
Live (MCU)
By default, the FaderPort is in Studio One operation mode. To
switch to Live operation, press and hold the NEXT button while
powering on your FaderPort, then press the Arm button to enable
Live (MCU) operation.
默认情况下，FaderPort 处于 Studio One 操作模式。要切换到现
场操作，在打开FaderPort电源的同时，按住NEXT按钮，然后按
Arm按钮，启用现场（MCU）操作。
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port on
your computer. No further installation is necessary.
FaderPort 在 macOS® 和 Windows® 中，都是一个符合等级标准
的设备。只需将FaderPort连接到电脑上的一个空闲USB端口。不
需要进一步安装。
Once you have connected your FaderPort to your computer and
the power supply, power it on and launch Live to set up the
FaderPort as a Mackie Control Universal device.
一旦你将FaderPort连接到你的电脑和电源上，打开电源并启动
Live，将FaderPort设置为 Mackie Control Universal 设备。
1. Go to Live | Preferences
进入Live | 首选项
2. Choose the Link MIDI tab and set Control Surface 1 to
Mackie Control and the Input and Output to "PreSonus
FP2."
选择链接MIDI标签，将 Control Surface 1 设置为 Mackie
Control，输入和输出设置为 "PreSonus FP2"。
3. Make sure that Track, Sync, and Remote are all
enabled for both the Input and the Output of
"MackieControl."
确保 "MackieControl " 的输入和输出，Track、Sync和
Remote全被启用。
Your FaderPort is now ready to use. Enjoy!
你的 FaderPort 现在可以使用了。尽情享受吧!
FaderPort™ Multichannel Production Controllers
Owner'sManual
32