Live (Mcu) - PRESONUS ioStation 24c Owner's Manual

8

Live (MCU)

8.1 Getting Started
8
Live (MCU)
Getting Started
8.1
Live (MCU)
By default, the ioStation 24c is in Studio One operation mode. To switch to
Live operation, press and hold the NEXT button while powering on your
ioStation 24c, then press the Arm button to enable Live (MCU) operation.
Once you have connected your ioStation 24c to your computer, launch
Live to set up the ioStation 24c as a Mackie Control Universal device.
1. Go to Live | Preferences
2. Choose the Link MIDI tab and set Control Surface 1 to Mackie
Control and the Input and Output to "ioStation 24c. "
3. Make sure that Track, Sync, and Remote are all enabled for
both the Input and the Output of "MackieControl. "
4. Select MIDI Port Setup and make sure that "In All
MIDI" box is unchecked and then click "OK. "
Your ioStation 24c is now ready to use. Enjoy!
ioStation 24c Audio Interface and Production Controllers
Owner's Manual
31