Cubase/Nuendo(Mcu); Getting Started 开始使用 - PRESONUS FaderPort Owner's Manual

5
Cubase / Nuendo (MCU)
Getting Started
5.1
5 Cubase / Nuendo (MCU)
5.1 Getting Started 开始使用
Cubase (MCU)
By default, the FaderPort is in Studio One operation mode. To switch to Cubase
/ Nuendo operation, press and hold the NEXT button while powering on your
FaderPort, then press the Bypass button to enable Cubase / Nuendo (MCU)
operation.
默认情况下，FaderPort 处于 Studio One 操作模式。要切换到 Cubase /
Nuendo 的操作，打开 FaderPor t的同时，按住NEXT按钮，然后按 Bypass 按
钮来启用 Cubase / Nuendo（MCU）的操作。
The FaderPort is a class-compliant device in both macOS® and Windows®.
Simply connect your FaderPort to a free USB port on your computer. No further
installation is necessary.
FaderPort在 macOS® 和 Windows®中都是一个符合等级标准的设备。只需将
FaderPort 连接到电脑上的一个空闲USB端口。不需要进一步安装。
Once you have connected your FaderPort to your computer and the power
supply, power it on and launch Cubase or Nuendo to set up the FaderPort as a
Mackie Control Universal device.
一旦你将 FaderPort 连接到你的电脑和电源上，打开电源并启动Cubase或
Nuendo，将 FaderPort 设置为 Mackie Control Universal 设备。
1. Go to Studio | Studio Setup.
进入工作室|工作室设置。
2. IntheSetupwindow,clickthe"Add/Remove"menu
to add the first Mackie Control device.
在设置窗口，点击 "添加/删除 " 菜单，添加第一个
Mackie Control 设备。
FaderPort™ Multichannel Production Controllers
Owner's Manual
25