Logic (Mcu); Getting Started开始使用 - PRESONUS FaderPort Owner's Manual

4

Logic (MCU)

Getting Started
4.1
4 Logic (MCU)
4.1 Getting Started
Logic (MCU)
开始使用
By default, the FaderPort is in Studio One operation mode. To
switch to Logic operation, press and hold the NEXT button while
powering on your FaderPort, then press the Mute button to enable
Logic (MCU) operation.
默认情况下，FaderPort 处于Studio One操作模式。要切换到Logic
操作，在打开 FaderPort电源的同时，按住NEXT按钮，然后按Mute
按钮，启用 Logic（MCU）操作。
The FaderPort is a class-compliant device in both
macOS ® and Windows ®. Simply connect your
FaderPort to a free USB port on your computer. No
further installation is necessary. FaderPort在macOS ®和
Windows ®中都是一个符合等级标准的设备。只需将
FaderPort 连接到计算机上的一个空闲USB端口。不需要
进一步安装。
Once you have connected your FaderPort to your computer
and the power supply, power it on and launch Logic. The
FaderPort will auto- configure as a Mackie Control Universal
device. If for some reason this does not happen, you will need
to enable it manually.
一旦你的FaderPort连接到你的电脑和电源上，打开电源并启动
Logic。FaderPort会自动配置为Mackie Control Universal设备。
由于某种原因如果没有实现，你需要手动启用它。
1. If you do not have Advanced preferences
enabled, go to Logic Pro | Preferences |
Advanced Tools...
如果你没有启用 Advanced preferences，请进入
Logic Pro | Preferences | Advanced Tools...
2. Enable "Show Advanced Tools." 启用 "显示先进工具"。
FaderPort™ Multichannel Production Controllers
Owner's Manual
18