PRESONUS FaderPort Owner's Manual page 28

5
Cubase / Nuendo (MCU)
Getting Started
5.1
3. Select "Mackie Control"from the pull-down menu.
从下拉菜单中，选择 "Mackie Control"。
4. Set the MIDI Input and Output to "PreSonus FP2."
将MIDI输入和输出设置为 "PreSonus FP2"。
5. Click "Apply." 点击 "Apply"
6. Select MIDI Port Setup and make sure that "In All MIDI" box is unchecked and
then click "OK."
选择 MIDI 端口设置，确保 "在所有 MIDI中" 的方框没有被选中，然后点击 "OK"。
7. You will need to switch the Mackie Control device to Compatibility mode. To do this,
select the Mackie Control from the Devices menu.
你需要把 Mackie Control 设备切换到 "Compatibility" 兼容模式。要做到这一点，从
设备菜单中选择 Mackie Control。
8. From the pop-up windows, select Cubase from the menu.
在 pop-up 窗口中，选择菜单中的 Cubase。
Your FaderPort is now ready to use. Enjoy!
FaderPort 现在你可以使用了。尽情享受吧!
FaderPort™ Multichannel Production Controllers
Owner's Manual
26