Transport Controls 传输控制; The Session Navigator 会话导航 - PRESONUS FaderPort Owner's Manual

3 Pro Tools (HUI)
3.4 The Session Navigator
3.2 Channel Strip 通道条插件
4
5
3.3 Transport Controls
1. Arm. Pressing the Arm button will allow you to arm
2. Mute.Mutes the corresponding channel's output
3 1
3. Solo. Isolates the corresponding channel's output
4. Bypass / Bypass All. At the time of publication,
5. Touch-Sensitive Fader. This 100 mm motorized
1 2 3
1. Stop. Stops playback. 停止播放。
2. Loop. Engages / disengages Looping. 启用/取消Looping播放。
3. Play / Pause. Starts playback at the current playback-cursor position. 在当
前播放光标的位置，开始播放。
4. Rewind. Press once to regress playback by bar, second, frame, or
base sample rate depending on mode. Press and hold to regress in
finer increments. Press the Rewind and Fast Forward buttons
simultaneously to Return to Zero. 按一次可以按小节、秒、帧或基本采
样率回放，取决于模式。按住不放可以以更细的增量回放。同时按
Rewind和Fast Forward 按钮可以Return 返回到零点 Zero。
FaderPort™ Multichannel Production Controllers
the currently selected track for recording. Press with
SHIFT to arm all tracks for recording.
Arm. 按 "Arm"按钮，可以为录音配备当前选定的轨
道。按下SHIFT键，可以为录音配备所有轨道。
signal. Press with SHIFT to clear mutes on the
active bank.
Mute. 将相应通道的输出信号静音。按 SHIFT 键可
以清除活动库的静音。
signal in the mix. Press with SHIFT clear soloes on
the active bank.
Solo.隔离混音中相应通道的输出信号。用 SHIFT键
清除活动库上的独奏。
this button has no functionality in Pro Tools.
Bypass / Bypass All. 在公布之时，这个按钮在
Pro Tools中没有任何功能。
fader can be used to control volume levels and
panning in Pan Flip mode. See Section 3.4 for
details.
Touch-Sensitive Fader. 这个100毫米的机动控制器，
可以用来控制音量大小和在 Pan Flip模式下的声像控
制。详见第3.4节。
4 5 6
Owner's Manual
15