Channel Strip 通道条插件; Transport Controls 传输控制 - PRESONUS FaderPort Owner's Manual

4 Logic (MCU)
4.2 Channel Strip
4.2 Channel Strip 通道条插件
4
5
4.3 Transport Controls 传输控制
1. Arm. Pressing the Arm button will allow you to arm
2. Mute.Mutes the corresponding channel's output
3 1
3. Solo.Isolates the corresponding channel's output
4. Bypass / Bypass All. At the time of publication,
5. Touch-Sensitive Fader. This 100 mm motorized fader
1 2 3
1. Stop. Stops playback. Press a second time to return to the
project start point, or the beginning of the nearest cycle area, if
Cycle mode is active.
停止播放。再按一次，回到项目的起始点，如果Cycle 模式处于
活动状态，则回到最近的循环区域的起始点。
2. Loop. Engages / disengages cycle/loop playback.
Press and hold the Loop and Rewind button simultaneously to
set the cycle start point at the current timeline position.
启用/取消循环/回路播放。同时按住 " Loop"和 "Rewind" 按钮，将
循环的起始点设置在当前的时间线位置。
Press and hold the Loop and Fast Forward buttons
simultaneously to set the cycle end point at the current
timeline position.
同时按住 "Loop" 和 "Fast"按钮，将循环终点设置在当前时间
FaderPort™ Multichannel Production Controllers
the currently selected track for recording. Press with
SHIFT to arm all tracks for recording.
按 "Arm"按钮，可以为录音配备当前选定的轨道。按
SHIFT键可为录音配备所有音轨。
signal. Press with SHIFT for Mute Clear. 将相应通
道的输出信号静音。按SHIFT键，可以清除静音。
signal in the mix. Press with SHIFT for Solo Clear.
隔离混音中相应通道的输出信号。与 SHIF T一起
按，可以进行独奏清除。
this button has no functionality in Logic.在公布
之时，这个按钮在Logic中没有任何功能。
can be used to control volume levels and panning in
Pan Flip mode. See Section 4.4 for details. 这个100毫米
的机动控制器可以用来控制音量大小和Pan Flip模式
下的声像控制。详情见第4.4节。
4 5 6
Owner'sManual
20