PRESONUS FaderPort Owner's Manual page 21

4
Logic (MCU)
Getting Started
4.1
3. Go to Logic Pro | Control Surfaces | Setup...
4. In the pop-up menu, go to New | Install... 在弹出的菜单中，进入新建|安装...
5. From the list of devices, select Mackie Control. 从设备列表中，选择 Mackie Control。
6. Click Add. 点击 "Add"
7. Right-click on the Mackie Control in the Control Surface
Setup and select Show/Hide Inspector. 右键单击控
制面设置中的Mackie控制，选择Show/Hide 检查器。
8. In the Inspector, set the Input and Output ports to"PreSonus FP2." 在检查器中，
将Input and Output端口设置为 "PreSonus FP2"。
Your FaderPort is now ready to use. Enjoy!
现在你的FaderPort已经可以使用了。好好享受吧!
FaderPort™ Multichannel Production Controllers
转到 Logic Pro | 控制界面 | 设置...
Owner's Manual
19