Live (Mcu) - PRESONUS FaderPort Owner's Manual

6

Live (MCU)

6.1 Getting Started
Live (MCU)
6
Getting Started
6.1
Live (MCU)
By default, the FaderPort is in Studio One operation mode. To switch to Live
operation, press and hold the NEXT button while powering on your FaderPort, then
press the Arm button to enable Live (MCU) operation.
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
Once you have connected your FaderPort to your computer, launch
Live to set up the FaderPort as a Mackie Control Universal device.
1. Go to Live | Preferences
2. Choose the Link MIDI tab and set Control Surface 1 to Mackie
Control and the Input and Output to "PreSonus FP2. "
3. Make sure that Track, Sync, and Remote are all enabled for
both the Input and the Output of "MackieControl. "
4. Select MIDI Port Setup and make sure that "In All
MIDI" box is unchecked and then click "OK. "
Your FaderPort is now ready to use. Enjoy!
FaderPort™ Multichannel Production Controllers
Owner's Manual
23