Channel Strip 通道条插件; Transport Controls 传输控制 - PRESONUS FaderPort Owner's Manual

6
Live (MCU)
Channel Strip
6.2
6.2 Channel Strip 通道条插件
4
5
6.3
Transport Controls 传输控制
1. Arm. Pressing the Arm button will allow you to
2. Mute. Mutes the corresponding channel's output
3 2 1
3. Solo. Isolates the corresponding channel's output
4. Bypass / Bypass All. Press to Show/Hide the Detail View.
5. Touch-Sensitive Fader. This 100 mm motorized
1 2 3
1. Stop. Stops playback. Press again to return to zero.
停止播放。再按一次就可以返回到零点。
2. Loop. Engages / disengages Looping.
启用/取消循环播放。
3. Play / Pause. Starts playback at the current playback-cursor position. Press again to
restart playback at the previous play position.
在当前的播放光标的位置，开始播放。再按一下，在前一个播放位的置，重新开始
播放。
4. Rewind. Press and hold to move the cursor backward through the timeline.
按住不放，可以使光标在时间轴上向后移动。
FaderPort™ Multichannel Production Controllers
arm the currently selected track. Press with SHIFT
to arm the currently focused bank of tracks for
recording. 按 "Arm "按钮，可以对当前选定的轨道
进行配备。按下SHIFT键，可以对当前关注的轨道
组进行配备，以便进行录音。
signal. Press with SHIFT to clear all mutes for the
currently focused bank.
将相应通道的输出信号静音。按SHIFT键可以清除
当前聚焦的库的所有静音。
signal in the mix. Press with SHIFT to clear all
soloes for the currently focused bank.
隔离混音中相应通道的输出信号。按SHIFT键可以
清除当前焦点库的所有独奏。
按下Show 显示/Hide隐藏键，详细视图
fader can be used to control volume levels and
panning in Pan Flip mode. See Section 6.4 for
details.
这个100毫米的机动控制器，可以用来控制音量大小
和Pan Flip 模式下的声像控制。 详见第 6.4 节。
4 5 6
Owner's Manual
33