Pro Tools(Hui); Getting Started开始使用 - PRESONUS FaderPort Owner's Manual

3

Pro Tools(HUI)

3.1 Getting Started
3 Pro Tools(HUI)
3.1
Getting Started 开始使用
ProTools (HUI)
By default, the FaderPort is in Studio One operation mode. To switch to Pro
Tools operation, press and hold the NEXT button while powering on your
FaderPort, then press the Touch button to enable Pro Tools (HUI) operation.
默认情况下，FaderPort 处于 Studio One 操作模式。要切换到Pro Tools操作，
在打开FaderPort电源的同时，按住 NEXT 按钮，然后按 Touch 按钮，启用Pro
Tools（HUI）操作。
TheFaderPort is a class-compliant device in both macOS ® and Windows ®.
Simply connect your FaderPort to a free USB port on your computer. No further
installation is necessary.
FaderPort 在 macOS ® 和 Windows ® 中都是一个符合等级标准的设备。只需
将FaderPort 连接到计算机上的一个空闲 USB 端口。不需要进一步安装。
Once you have connected your FaderPort to your computer and the power
supply, power it on and launch Pro Tools to set up the FaderPort as a HUI
device.
你的 FaderPort 一旦连接到你的电脑和电源上，打开电源并启动 Pro Tools，
将 FaderPort 设置为HUI设备。
1. Go to Setups | Peripherals. 进入 "Setups" | "Peripherals"。
2. Create one HUI device under MIDI Controllers. 创建一个在MIDI控制器下的HUI设备。
3. Set the Receive From and Send To menus to "PreSonus FP2" and #Ch's to 8.
将 "Receive From" 和 "Send To" 菜单设置为 "PreSonus FP2"，将#Chs设置为8。
4. Click "OK." 点击 "OK"
Your FaderPort is now ready to use. Enjoy!
你的FaderPort现在就可以使用了。请享受吧!
FaderPort™ Multichannel Production Controllers
Owner'sManual
14