Studio One; Getting Started开始使用 - PRESONUS FaderPort Owner's Manual

2

Studio One

Getting Started
2.1
2 Studio One
2.1 Getting Started 开始使用
Studio One
By default, your FaderPort is configured for Studio One. No further device
setup is required.
在默认情况下，你的 FaderPort 是为 Studio One 配置的。不需要进一步的设
备设置。
If you have changed the FaderPort's Operation Mode and would like to return
to using it with Studio One, press and hold the NEXT button while powering
on your FaderPort, then press the Solo button to enable Studio One.
如果你已经改变了FaderPort的操作模式，并希望回到 Studio One 的使用，请
在 FaderPort开机时，按住NEXT按钮，然后按Solo按钮，启用Studio One。
Note: In addition to Studio One, this operation mode should be used with
other DAWs that provide native FaderPort support. A complete list of native-
support DAW applications is available at www.presonus.com.
注意：除了 Studio One 之外，这种操作模式，应该与其他提供本地 FaderPort
支持的 DAW 一起使用。可以在
用程序的完整列表。
The FaderPort is a class-compliant device in both macOS® and Windows®.
Simply connect your FaderPort to a free USB port on your computer. No
further installation is necessary.
FaderPort 在 macOS® 和 Windows® 中，都是一个符合等级标准的设备。只
需将FaderPort 连接到电脑上的一个空闲 USB 端口。不需要进一步安装。
To configure your FaderPort in Studio One：
要在 Studio One 中配置你的 FaderPort：
1. From the Start page, click on the Configure External Devices link.
在 "Start" 页面，点击 "Configure External
2. Click the Add button.
点击 "Add" 键
FaderPort™ Multichannel Production Controllers
www.presonus.com 上获得本机支持 DAW 应
Devices" 链接。
Owner's Manual
6