Cubase / Nuendo (Mcu); Getting Started - PRESONUS FaderPort 8 Owner's Manual

6

Cubase / Nuendo (MCU)

6.1

Getting Started

6 Cubase / Nuendo (MCU)
6.1 Getting Started
When you first power on your FaderPort 8, you will be given the opportunity
to select which mode of operation you'd like to use. When using the FaderPort
8 with Cubase or Nuendo, select Mackie Control Universal (MCU).
Mackie Control. Select Mackie Control to use your FaderPort 8 as a Mackie Control
device in Cubase or Nuendo by pressing the Select button below its scribble strip.
Once you have selected your mode, press the Select button below the "Exit" screen to
reboot your FaderPort. Once you have set the operation mode, your FaderPort 8 will
retain this information.
If you would like to change the mode at any point, power on the unit while
holding down the first two Select buttons.
Power User Tip: From this menu, you can also adjust the fader sensitivity and speed to
fine tune your FaderPort 8 to work the way you want. Please see Section 9 for more
information on the customized setup modes.
The FaderPort 8 is a class-compliant device in both macOS® and Windows®.
Simply connect your FaderPort 8 to a free USB port on your computer. No further
installation is necessary.
FaderPort™ 8
Owner's Manual
32