Cubase / Nuendo (Mcu); Getting Started - PRESONUS FaderPort Owner's Manual

5

Cubase / Nuendo (MCU)

5.1

Getting Started

Cubase / Nuendo (MCU)
5
Getting Started
5.1
Cubase (MCU)
By default, the FaderPort is in Studio One operation mode. To switch to Cubase /
Nuendo operation, press and hold the NEXT button while powering on your
FaderPort, then press the Bypass button to enable Cubase / Nuendo (MCU)
operation.
The FaderPort is a class-compliant device in both macOS® and
Windows®. Simply connect your FaderPort to a free USB port
on your computer. No further installation is necessary.
Once you have connected your FaderPort to your computer, launch Cubase
or Nuendo to set up the FaderPort as a Mackie Control Universal device.
1. Go to Devices | Device Setup.
2. In the Setup window, click the "Add/Remove" menu
to add the first Mackie Control device.
FaderPort™ Multichannel Production Controllers
Owner's Manual
18