Air Filter / Breather Filter - Polaris RANGER 2x4 Manual

GENERAL INFORMATION
6. Remove the radiator.
Inlet Radiator Hose
Mounting
Screws
Surge Tank
Hose
Outlet Radiator
Hose Temp. Sensor
AIR FILTER/ BREATHER
FILTER SERVICE
It is recommended that the air filter be replaced
annually. When riding in extremely dusty conditions
replacement will be required more often.
The filter should be inspected periodically before each
ride, using the following procedure.
1. Lift the box to access the filter box cover.
2. Remove clips (2) from air box cover and remove
cover. Inspect the gasket. It should adhere tightly
to the cover and seal all the way around.
3. Remove air filter assembly. Do not clean the main
filter, the filter should be replaced.
4. Inspect main element and replace if necessary. If
the filter has been soaked with fuel or oil it must be
replaced.
2.22
Cover Seal
Cap
Installation
1. Reinstall the filter into the air box container. Be
Plug
sure the filter fits tightly in the air box.
NOTE: Apply a small amount of general purpose
grease to the sealing edges of the filter before
installing.
2. Check air box. If oil or water deposits are found,
drain them into a suitable container.
NOTE: Service more frequently if vehicle is operated
in wet conditions or at high throttle openings for
extended periods.
3. Install air box cover and secure with clips.
Breather Filter
Filter
Cover