Polaris RANGER 2x4 Manual page 186

4. Pull the middle axle (C) straight out of the frame.
C
MID DRIVE SHAFT
INSTALLATION (6X6)
1. Slide the middle axle (A) into the bearing carrier hub
(B).
2. Apply Anti--Seize Compound onto the middle
gearcase output shaft splines.
7.28
3. Install a new roll pin to secure the middle driveshaft
4. Lift bearing carrier into place and install bolt to
A
B
Reinstall the
middle driveshaft (A) onto the middle gearcase
output shaft. Be sure to align the roll pin holes of
the middle driveshaft (A) and middle gearcase.
(A) to the middle gearcase.
upper control arm. Torque bolt to 35 ft. lbs. (48
Nm).
FINAL DRIVE
A