Polaris RANGER 2x4 Manual page 215

FINAL DRIVE
Tighten Jam Nuts
Bracket
NOTE: Threads and Jam
Ill. 4
Nuts Centered on Bracket
6. If the adjustment of the linkage on the rear
differential (Steps 1--5) does not work. Repeat
these steps on the linkage located under the front
hood. This linkage is closely attached to the rear
differential lever.
Rear Differential Linkage (Front)
Linkage
Ill. 5
DIFFERENTIAL LOCK LEVER
REMOVAL/INSTALLATION
(2X4 & 4X4)
1. Disconnect linkage cable from lock differential.
2. Remove the cotter key, washers and bushings that
attach lock differential to the cable and frame.
3. Pull off the shifter knob.
4. Lift lock differential out of mounting bracket and
away from frame.
5. Repeat the steps above in reverse order for the
differential lock lever installation.
Differential Lock Location
Differential
Lock
Cotter Key
Bushing
Bearing
Knob
Grommet
Differential Lock Breakdown
Spring
Linkage Cable
Washers
Lock
Differential
7.57