Table of Contents
Advertisement
The best way to remove dust and dirt from the ASSA ABLOY SL500 Resilience is to use water and a soft cloth or
a sponge. A gentle detergent may be used. To maintain the quality of the enamel layer, the surfaces should be
cleaned once/four months period. The cleaning should be documented. To avoid damages to the profiles the
brushes/weather stripping must be vacuumed weekly.
•
Do not expose windows, doors or profiles to alkalis. Both aluminum and glass are sensitive to alkalis.
•
Do not clean with high pressure water. Operator, program selector and sensor may be damaged and water
may enter the profiles.
•
Do not use polishing detergent.
•
Do not scrub with materials like Scotch-Brite, as this will cause mechanical damage.
ANSI/BHMA A156.10 and ASSA ABLOY Required Signage
DOOR
PANEL
Check that all required signage is applied and intact.
1018022-US-0.0
CLEANING
ACTIVATE
CTI
SWITCH TO
ITC
OPERATE
AUTOMATIC
CAUTION
DOOR
SO
SX
PANEL
Issue 2018-05-25
AUTOMATIC
CAUTION
DOOR
SX
SO
PANEL
PANEL
or install
on muntin
bar
13
Advertisement
Table of Contents
