Assa Abloy SL500 Owner's Manual page 22

Sliding door operator
Hide thumbs Also See for SL500:
Table of Contents

Advertisement

Figure 8
Figure 9
Figure 10
IF YOU HAVE A PROBLEM, TURN OFF THE DOOR OPERATING EQUIPMENT AND
CALL AN AUTOMATIC DOOR SUPPLIER TO MAKE PROMPT REPAIRS.
22
prevent the door from closing should not exceed 30
pounds. This can be measured with a force gauge.
4.
If an electromechanical lock is installed check the
function by setting the operation mode selector to OFF.
Make sure the door cannot be opened by pulling the
door leaf in the opening direction.
5.
Activating Switch. (Knowing Act) Doors equipped
with a manual operate switch shall, when activated,
hold the door open for five seconds minimum after
release of activating switch.
Doors equipped with manual activating switch shall
have a decal as follows: "AUTOMATIC DOOR.
ACTIVATE SWITCH TO OPERATE". The sign
should be visible from both sides of the door or the
side with the knowing act switch if there is only one.
(See Figure 9)
6.
Emergency Breakout. Test by manually pushing door
at lock area in direction of emergency exit. Release
door. The door should either stop operation or spring
to closed position. Make sure door panel or panels are
properly re-latched.
If the door is equipped with breakaway sidelites, door
operation should stop when sidelites are broken out.
(See Figure 10).
7.
Housekeeping. Be sure floor guides are kept clean and
free of any debris which could prevent proper door
slide.
Check the door area for tripping or slipping hazards.
Check all door panels for damage. Make sure that all
hardware and overhead covers are properly secured.
There should be no bulletin boards, literature racks,
merchandise displays, or other attractions that would
interfere with the use of the door or invite people to
stop or stand in the door area.
Remove dust and dirt from the operator. Dirt on the
sliding track should be removed with methylated
spirits. If replacement is necessary, please contact your
local ASSA ABLOY representative.
Check if any of the parts need lubrication.
8.
Traffic Patterns. Observe traffic patterns. Plan routing
so people enter and exit in a straight approach, directly
towards the center of the door opening.
Issue 2018-05-25
1018022-US-0.0

Advertisement

Table of Contents
loading

Table of Contents