Fronius Transpocket 150 Quick Reference

Hide thumbs Also See for Transpocket 150:

Download this manual

Transpocket 150/180

Quick reference

Safety

Before carrying out any work with the device, ensure that you have read and understood all the documents provided as well as those

available online! This document does not describe all the functions of the device. For a complete description of the device, refer to

the Operating Instructions.

Welding settings

Available welding processes:

MMA welding

MMA welding with Cel electrode

TIG welding

42,0426,0214,EN

Setting values:

012-26012022

Arc-force dynamic: 0 - 100 | factory setting = 20

Welding current: TP 150 = 10 - 150 A /

TP 180 = 10 - 180 A (STICK), 10 - 220 A (TIG)

SoftStart / HotStart function: 1 - 200% |factory setting = 130%

Pulse welding (only available for MMA welding):

OFF / 0.5 - 990 Hz | Factory setting = OFF

Operating Instructions

https://manuals.fronius.com/

html/4204260203

Need help?

Do you have a question about the Transpocket 150 and is the answer not in the manual?

Page 1 Transpocket 150/180 Quick reference Safety Before carrying out any work with the device, ensure that you have read and understood all the documents provided as well as those available online! This document does not describe all the functions of the device. For a complete description of the device, refer to the Operating Instructions.
Page 2 Accessing the setup menu Setup menu Setup menu Setup menu MMA welding Cel electrodes Parameters for MMA welding Changing welding parameters Starting current duration: 0.1 - 1.5 seconds | 0.5 seconds* Anti-Stick: On* / OFF Start ramp: On* / OFF Turn and press the adjusting dial to select and change parameters.

Transpocket 180