Markings On The Device; General And Electrical Risks - Fronius AccuPocket 150/400 TIG Operating Instructions Manual

Hide thumbs Also See for AccuPocket 150/400 TIG:
Table of Contents

Advertisement

Markings on the
Devices with the CE marking satisfy the essential requirements of the applicable
device
guidelines.
Devices displaying the EAC mark of conformity satisfy the requirements of the
relevant standards in Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan.
General and
1
electrical risks
2
3
Minimum AWG size of an extension cable
25 ft (7.6 m)
AWG 16
4
5
6
7
8
9
KEEP THESE INSTRUCTIONS SAFE- This guide contains important safety
and Operating Instructions for these charger types (for model, see first page
of this document)
Do not expose the charger to rain or snow
The use of accessories not sold or recommended by the charger manufac-
turer can lead to fire, electric shock or personal injury
50 ft (15.2 m)
AWG 12
To reduce the risk of damage to plugs and cables, always unplug the charger
by pulling the plug rather than the cable
Only use an extension cable if it is absolutely necessary. The use of an incor-
rect extension cable can lead to fire and electric shock. If an extension cable
must be used, make sure that
-
The pins of the extension cable plug are of the same number, size and
shape as those of the battery charger
-
The extension cable is correctly wired and in good electrical condition
-
The cable size is large enough for the AC amperage of the battery char-
Technical data
ger, see section
Do not use the battery charger with a damaged cable or plug - replace the
cable or plug immediately
Do not use the battery charger if it has been subjected to heavy impact,
dropped or otherwise damaged; hand it over to a qualified service technician
Do not dismantle the battery charger; hand it over to a qualified service tech-
nician if maintenance or repair is required. Incorrect reassembly can result in
fire and electric shock
To reduce the risk of an electric shock, unplug the battery charger from the
socket before carrying out any maintenance or cleaning. This risk cannot be
reduced by setting controls to the "Off" position
100 ft (30.5 m)
AWG 10
80
on page
150 ft (45.6 m)
AWG 8
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activecharger 1000

Table of Contents