Revision History - ST STM8S Getting Started

AN2752
12

Revision history

Date
03-Jun-2008
01-Sep-2008
01-Apr-2009
05-Aug-2011
31-Aug-2011
04-Apr-2018
Table 3. Document revision history
Revision
1 Initial release
STM8S207/208 replaced by STM8S20xxx
Figure 10: Reference design on page 19
2 pinout on page 21
STM8S20xxx datasheet
Figure 7: Reset management on page 14
3 Modified Section 2.2: Main operating voltages on page 8
Table 1: General operating
4
Figure 10: Reference design on page
capacitor.
Added STM8A throughout the document as this revision covers STM8A
devices.
Replaced "Root part number 2" with STM8S and STM8A.
Updated Section 2.2: Main operating
General operating conditions
5
STM8A datasheets.
Removed Section 5.2: Hardware reset
Table 1: Component
Removed Section 7.3:
Updated references in
Document scope limited to STM8S and STM8AF Series, hence
updated title and Introduction.
6 Updated Recommendations
and VCAP/VSS
Minor text edits across the whole document.
AN2752 Rev 6
Changes
modified to be in line with the pin description of the
conditions: replaced
19: updated the value of the C4
voltages: removed
and added a reference to the STM8S and
implantation.
list: updated 'Reference' value for 'ID' 6.
Pinouts.
Section 11: Documentation and on-line support
and Figure 3: Typical layout of VDD/VSS
pairs.
Revision history
and Figure 12: LQFP 80-pin
modified
Table 1:
39/40
39