Follow Up; Figure 26. Stm8 Evaluation Board - ST STM8S Getting Started

AN2752
The LCD display on the STM8 evaluation board indicates a successful debug session (see
Figure 26).
10.3.6

Follow up

Step by step, additional peripherals of STM8S and STM8AFdevices can be run, following on
from the initial debug session described above.
Many features of STM8S and STM8AFdevices are supported by dedicated hardware on the
STM8 evaluation board. The necessary software drivers (CAN driver, LIN driver, buttons,
memory cards, buzzer, etc) are delivered in the STM8 firmware library.
Setting up the development environment

Figure 26. STM8 evaluation board

AN2752 Rev 6 37/40
39