Connecting The Ac Power Cord - Cisco AS5300 Manual

Do not touch the power supply when the power cord is connected. For systems with a power
switch, line voltages are present within the power supply even when the power switch is off and
the power cord is connected. For systems without a power switch, line voltages are present
within the power supply when the power cord is connected.

Connecting the AC Power Cord

Take these steps:
Step 1 Connect one end of the power cord to the power connector on the rear panel of the access
server. (See .)
Step 2 Connect the other end of the power cord to the power outlet.
Warning
The plug-socket combination must be accessible at all times because it serves as the main
disconnecting device.
Step 3 Power ON the access server.
The internal power supply fan should power on.
Figure 3-14 Connecting the AC Power Cord