122
SETTING
Remove clamping block 1.
Install clamping block 1 in re-
quired position A or B and
tighten bolt 2.
Clamping block on
footrest hinge
20 Nm
Position footrest 3 on clamp-
ing block 2.
Install screws 1.
Footrest on clamping
block
10 Nm
Remove and refit the footrest
on the other side in the same
way.
HANDLEBARS
Adjustable handlebars
When adjusting the
handlebars, make sure
that the mirrors do not
come into contact with the
windscreen.
If necessary, adjust the mirror
arm accordingly.
The tilt of the handlebars is ad-
justable within the range indic-
ated by mark 1.
Have the handlebars adjusted
by a specialist workshop,
preferably an authorised
BMW Motorrad retailer.
SEATS
Removing passenger seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.