BMW Motorrad R 1250 GS 2002 Rider's Manual page 130

124 SETTING
The passenger seat engages
with an audible click.
Removing rider's seat
Remove the passenger seat
( 122).
Turn the ignition key to the
left in seat lock 1 and hold it
in this position, while pressing
down the rear part 2 of the
rider's seat.
Slightly raise the rider's seat
at the rear and release the
ignition key.
Remove the rider's seat and
place it, upholstered side
down, on a clean surface.
Adjusting height and angle of
tilt of rider's seat
Remove the rider's seat
( 124).
To remove the front height
adjustment 1, push the lock-
ing mechanism 2 forwards
and remove the height adjust-
ment in an upwards direction.
To adjust the low seat pos-
ition, install the front height
adjustment and align it with 1
(identification L).
To adjust the high seat pos-
ition, install the front height
adjustment and align it with 2
(identification H).