BMW Motorrad R 1250 GS 2002 Rider's Manual page 92

86 OPERATION
the vehicle reaching a stand-
still on an incline of at least
3 %.
Green holding symbol is
displayed.
Hill Start Control Pro is activ-
ated.
To switch off the
Hill Start Control Pro,
operate the brake lever 1 or
footbrake lever again.
If Hill Start Control Pro
has been deactivated by
means of the handbrake lever,
automatic Hill Start Control is
deactivated for the next 4 m.
The holding symbol disap-
pears.
Alternatively, ride off in 1st or
2nd gear.
In order for the motor-
cycle to pull away from
rest with Hill Start Control
Pro, the throttle grip has to be
turned to open the throttle for
pullaway.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control Pro is deac-
tivated.
See the "Engineering details"
section for more information
on Hill Start Control Pro:
Hill Start Control function
( 169)
Setting up Hill Start Control
Pro
with riding modes Pro
Switch on the ignition (
Navigate to
Vehicle settings
Select
HSC Pro
To switch off Hill Start Con-
trol Pro, select
Hill Start Control Pro is deac-
tivated.
To switch on manual Hill Start
Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
To switch on automatic Hill
Start Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motor-
cycle is on a gradient of at
least 3%, Hill Start Control
Pro is automatically activated.
The selected setting remains
stored even after the ignition
is switched off.
OE
,
Settings
.
.
.
Off
Manual
Auto
60).
.
.